当前位置:龙人芯片解密公司 >> Microchip芯片解密 >> SST49LF016C单片机解密与芯片功能概述

SST49LF016C单片机解密与芯片功能概述

  龙人多年来始终专注于各类IC解密、单片机解密、芯片解密、DSP解密、CPLD芯片解密、FPGA解密等技术研究领域,致力于为国内外各类电子工程师及电子企业的学习研究与参考设计提供技术参考与技术支持。
  这里,我们仅提供对SST49LF016C单片机的基本特性介绍,有SST49LF016C芯片解密需求者请直接与我们联系咨询详情。
  特性
  Operational Clock Frequency – 33 MHz – 66 MHz
  Organized as 2M x8
  Conforms to LPC Interface Specification v1.1 – Support Multi-Byte Firmware Memory Read/ Write Cycles
  Single 3.0-3.6V Read and Write Operations
  LPC Mode – 5-signal LPC bus interface for both in-system and factory programming using programmer equipment – Multi-Byte Read data transfer rate 15.6 MB/s @ 33 MHz PCI clock and 31.2 MB/s @ 66 MHz clock - Firmware Memory Read cycle supporting 1, 2, 4, 16, and 128 Byte Read - Firmware Memory Write cycle supporting 1, 2, and 4 Byte Write
  Two-cycle Command Set
  Security ID Feature – 256-bit Secure ID space - 64-bit Unique Factory Pre-programmed Device Identifier - 192-bit User-Programmable OTP
  Superior Reliability – Endurance: 100,000 Cycles (typical) – Greater than 100 years Data Retention
  Low Power Consumption – Active Read Current: 12 mA (typical) – Standby Current: 10 μA (typical)
  Uniform 4 KByte sectors – 35 Overlay Blocks: one 16-KByte Boot Block, two 8-KByte Parameter Blocks, one 32-Kbyte Parameter Block, thirty-one 64-KByte Main Blocks.
  Fast Sector-Erase/Program Operation – Sector-Erase Time: 18 ms (typical) – Block-Erase Time: 18 ms (typical) – Program Time: 7 μs (typical)
  Auto Address Increment (AAI) for Rapid Factory Programming (High Voltage Enabled) – RY/BY# pin for End-of-Write detection – Multi-Byte Program – Chip Rewrite Time: 4 seconds (typical)
  Packages Available – 32-lead PLCC – 32-lead TSOP (8mm x 14mm) – 40-lead TSOP (10mm x 20mm)
  All non-Pb (lead-free) devices are RoHS compliant
  有SST49LF016C芯片解密等MICROCHIP单片机解密需求者欢迎与龙人科技联系咨询详情。